Home | Engineering | Construction Materials - CE6401 | Portland slag Cement (IS: 455)

Civil - Construction Materials: Lime, Cement, Aggregates, Mortar

Portland slag Cement (IS: 455)

   Posted On :  15.07.2016 02:02 pm

It is manufactured either by intimately intergrinding a mixture of Portland cement clinker and granulated slag with addition of gypsum or calcium sulphate, or by an intimate and uniform blending of Portland cement and finely ground granulated slag.

Portland slag Cement (IS: 455)

 

Portland slag Cement (IS: 455): It is manufactured either by intimately intergrinding a mixture of Portland cement clinker and granulated slag with addition of gypsum or calcium sulphate, or by an intimate and uniform blending of Portland cement and finely ground granulated slag. Slag is a non-metallic product consisting essentially of glass containing silicates and alumino-silicates of lime and other bases, as in the case of blast-furnace slag, which is developed simultaneously with iron in blast furnace or electric pig iron furnace. Granulated slag is obtained by further processing the molten slag by rapid chilling or quenching it with water or steam and air. The slag constituent in the cement varies between 25 to 65 per cent.

 

Properties: The chemical requirements of Portland slag cement are same as that of 33 grade Portland cement. The specific surface of slag cement should not be less than 225 m2/kg. The expansion of the cement should not be more than 10 mm and 0.8 per cent when tested be Le Chatelier method and autoclave test, respectively. The initial and final setting times and compressive strength requirements are same as that for 33 grade ordinary Portland cement.

Uses: This cement can be used in all places where OPC is used. However, because of its low heat of hydration it can also be used for mass concreting, e.g., dams, foundations, etc.

 

Tags : Civil - Construction Materials: Lime, Cement, Aggregates, Mortar
Last 30 days 78 views

​ReadOrRefer.in

OTHER SUGEST TOPIC