Home | | Computer Technology 12th Std | AutoCAD-Draw a Figure

Practical - AutoCAD-Draw a Figure | 12th Computer Technology : Practical

Chapter: 12th Computer Technology : Practical

AutoCAD-Draw a Figure

To draw a figure using the Absolute Coordinate system

AutoCAD-Draw a Figure


AIM

To draw a figure using the Absolute Coordinate system

Draw a figure using the Absolute Coordinate system. The absolute coordinate of the points are given in the following table.




Procedure :

1.        To start AutoCAD 2016, double-click the AutoCAD 2016 - English icon on your Desktop (or) click Start > All Programs > Autodesk > AutoCAD 2016 > AutoCAD 2016-English.

2.        Start a new file with acad.dwt template in the Drafting & Annotation workspace.

3.        Choose the Zoom All tool on the Navigation Bar.

4.        Turn OFF the Grid icon on the status bar.

5.        Turn OFF the Dynamic Input mode, if active.

6.        Click Home > Draw > Line on the ribbon, or enter LINE or L in the command line. The prompt sequence is given below.

Command: LINE

Specify first point: 55,100

Specify next point or [Undo]: 120,100

Specify next point or [Undo]: 120,70

Specify next point or [Close/Undo]: 230,70

Specify next point or [Close/Undo]: 230,100

Specify next point or [Close/Undo]: 295,100

Specify next point or [Close/Undo]: 295,210

Specify next point or [Close/Undo]: 275,235

Specify next point or [Close/Undo]: 80,235

Specify next point or [Close/Undo]: 55,210

Specify next point or [Close/Undo]: C

7. Save the file as Line-example1.dwg.


Output



Conclusion:

The expected output is achieved.



Tags : Practical , 12th Computer Technology : Practical
Study Material, Lecturing Notes, Assignment, Reference, Wiki description explanation, brief detail
12th Computer Technology : Practical : AutoCAD-Draw a Figure | Practical


Privacy Policy, Terms and Conditions, DMCA Policy and Compliant

Copyright © 2018-2023 BrainKart.com; All Rights Reserved. Developed by Therithal info, Chennai.