Erecting Light Weight Components On Tall Structures

ERECTING LIGHT WEIGHT COMPONENTS ON TALL STRUCTURES

          Besides high raise buildings the usage of steel element is also popular with       

          construction of hospital and commercial complexes              

          Instead of concrete beams and columns more than 6100 tonnes of steel have been used to     

          build the main frames             

Light weight blocks are used for patricians to reduce the dead load building

The usage of permanent concrete form works and structural steel elements will be the main constituter for erecting light weight components on tall structures results rapid speed of constructions.

Hence the erection of steel beams and columns as well as the installation of concrete form work consumes only less time

Self drilling tapping screws are the most prevalent fasteners. Steel to steel connections can be carried out to connect struts or joist and track together

Entire can be erected manually with out the use of heavy equipment

All these structures require few battery powered screw gunes and some ropes and pulleys

No scaffoldings is require for assembly and disc assembly of the structures because the structure itself provides the scaffoldings as it goes up or comes down

Almost any number of column sections can be added to make it any height we desire

During the construction of tall structures the following equipments areused for the aerial transporting and handling