Dilution and dispersal - Pollution Control Strategies

Pollution Control Strategies 

Dilution and dispersal

The concept of ‘dilute and disperse’ was briefly mentioned earlier in this dis-cussion. In principle, it involves the attenuation of pollutants by permitting them to become physically spread out, thereby reducing their effective point concentration. The dispersal and the consequent dilution of a given substance depends on its nature and the characteristics of the specific pathway used to achieve this. It may take place, with varying degrees of effectiveness, in air, water or soil.

Air

In general terms, air movement gives good dispersal and dilution of gaseous emissions. However, heavier particulates tend to fall out near the source and the mapping of pollution effects on the basis of substance weight/distance travelled is widely appreciated.

Water

Typically, there is good dispersal and dilution potential in large bodies of water or rivers, but smaller watercourses clearly have a correspondingly lower capacity. It is also obvious that moving bodies of water disperse pollutants more rapidly than still ones.

Soil

Movement through the soil represents another opportunity for the dilute and disperse approach, often with soil water playing a significant part, and typically aided by the activities of resident flora and fauna. The latter generally exerts an influence in this context which is independent of any bioaccumulation potential.