ENGINEERING

Under : ENGINEERING    Posted On :  21.08.2018 03:30 am

In an integrating ADC, a current, proportional to the input voltage, charges a capacitor for a fixed time interval T charge. ....

Under : ENGINEERING    Posted On :  21.08.2018 01:16 am

Successive-approximation ADC is a conversion technique based on a successive-approximation register (SAR).....

Under : ENGINEERING    Posted On :  20.08.2018 10:56 pm

This process is extremely fast with a sampling rate of up to 1 GHz.....

Under : ENGINEERING    Posted On :  20.08.2018 08:30 pm

Like DAC, ADCs are also having many important specifications. ....

Under : ENGINEERING    Posted On :  20.08.2018 06:13 pm

Sample-and-hold (S/H) is an important analog building block with many applications, including analog-to-digital converters (ADCs) and switched-capacit....

Under : ENGINEERING    Posted On :  20.08.2018 03:47 pm

The Switches which connects the digital binary input to the nodes of a D/A converter is an electronic switch.....

Under : ENGINEERING    Posted On :  20.08.2018 01:45 pm

Linear Integrated Circuits : Analog to Digital And Digital to Analog Converters....

Under : ENGINEERING    Posted On :  20.08.2018 11:48 am

An enhancement of the binary-weighted resistor DAC is the R-2R ladder network.....

Under : ENGINEERING    Posted On :  20.08.2018 09:27 am

The binary-weighted-resistor DAC employs the characteristics of the inverting summer Op Amp circuit.....

Under : ENGINEERING    Posted On :  20.08.2018 07:23 am

Resolution: This is the number of possible output levels the DAC is designed to reproduce.....

Under : ENGINEERING    Posted On :  20.08.2018 04:55 am

A DAC converts an abstract finite-precision number (usually a fixed-point binary number) into a concrete physical quantity (e.g., a voltage or a press....

Under : ENGINEERING    Posted On :  20.08.2018 02:51 am

The natural state of audio and video signals is analog.....

Under : ENGINEERING    Posted On :  20.08.2018 12:53 am

Linear Integrated Circuits ( LIC ) Subject : Analog Multiplier and PLL - Question Bank, Important Questions and Answers....

Under : ENGINEERING    Posted On :  19.08.2018 10:36 pm

The output from a PLL system can be obtained either as the voltage signal vc(t) corresponding to the error voltage in the feedback loop, or as a frequ....

Under : ENGINEERING    Posted On :  19.08.2018 08:34 pm

Operating frequency range: 0.001Hz to 500 Khz. Operating voltage range: ±6 to ±12v.....

Under : ENGINEERING    Posted On :  19.08.2018 06:28 pm

If the modulating voltage at pin 5 is increased, the voltage at pin 6 also increases, resulting in less voltage across R1 and thereby decreasing the c....

Under : ENGINEERING    Posted On :  19.08.2018 04:16 pm

Phase locked loops can also be analyzed as control systems by applying the Laplace transform.....

Under : ENGINEERING    Posted On :  19.08.2018 02:01 pm

The PLL consists of i) Phase detector ii) LPF iii) VCO.....