Home | | Electrical Engineering and Instrumentation | Types, Construction and Working of 3 Phase Induction Motor

Chapter: Electrical Engineering and Instrumentation : Induction Machines and Synchronous Machines

Types, Construction and Working of 3 Phase Induction Motor

Three phase induction motor has two types. i. Squirrel cage induction motor ii. Slip ring induction motor

Types, Construction and Working of 3 Phase Induction Motor

 

Three phase induction motor has two types.

i. Squirrel cage induction motor

ii. Slip ring induction motor

The stator of both motors is same and the rotor is different.

Squirrel cage rotor


Wound rotor



A stator consists of steel frame that supports a hollow cylindrical core of stacked laminations.

 

Slots on the internal circumference of stator house the stator winding.

 

A rotor also composed of punched laminations, with rotor slots for the rotor winding.

 

There are two types of rotor windings:

 

Squirrel cage windings, which produce squirrel cage induction motor.

 

Conventional three phase windings made up of insulated wire, which produce a wound rotor induction motor.

 

Squirrel cage rotor consists of copper bars slightly longer than rotor which is pushed in to the slots.

 

The ends are welded to copper end rings, so that all the bars are short circuited.

 

A wound rotor has three phase winding similar to the stator winding.

 

The rotor winding terminals are connected to three slip rings which turn with the rotor.

 

The slip rings/brushes allow external resistors to be connected in series with the winding.

 

The external resistors are mainly used during start up. Under normal running conditions the windings short circuited externally.

 

Working

Induction motor works on the principle of Faraday’s laws of electromagnetic induction.

 

When the three supply is given to the stator of an induction motor, rotating magnetic field is produced around the stator.

 

This field cuts the rotor conductors; an emf is produced as per Faraday’s laws of electromagnetic induction.

 

The induced voltage produces currents which circulate in a loop around the conductors.

 

Since the current carrying conductors lie in the magnetic field, they experience mechanical force (Torque).

 

The force is always acts in a direction to drag the conductor along with the magnetic field.

Study Material, Lecturing Notes, Assignment, Reference, Wiki description explanation, brief detail
Electrical Engineering and Instrumentation : Induction Machines and Synchronous Machines : Types, Construction and Working of 3 Phase Induction Motor |


Privacy Policy, Terms and Conditions, DMCA Policy and Compliant

Copyright © 2018-2024 BrainKart.com; All Rights Reserved. Developed by Therithal info, Chennai.