Home | | Power System Analysis | Representation of Single Line to Ground, Line to Line and Double Line to Ground Fault Conditions

Chapter: Power System Analysis : Symmetrical Components And Unbalanced Fault Analysis

Representation of Single Line to Ground, Line to Line and Double Line to Ground Fault Conditions

A 50MVA, 11KV, synchronous generator has a sub transient reactance of 20%.

REPRESENTATION  OF  SINGLE  LINE  TO  GROUND,  LINE  TO  LINE  AND DOUBLE LINE TO GROUND FAULT CONDITIONS.

 

A 50MVA, 11KV, synchronous generator has a sub transient reactance of 20%. The generator supplies two motors over a transmission line with transformers at both ends as shown in fig. The motors have rated inputs of 30 and 15 MVA, both 10KV, with 25% sub transient reactance. The three phase transformers are both rated 60MVA, 10.8/121KV, with leakage reactance of 10% each. Assume zero sequence reactance for the generator and motors of 6% each. Current limiting reactors of 2.5 ohms each are connected in the neutral of the generator and motor number 2. The zero sequence reactance of the transmission line is 300 ohms. The series reactance of the line is 100 ohms. Draw the positive, negative and zero sequence networks.







Study Material, Lecturing Notes, Assignment, Reference, Wiki description explanation, brief detail
Power System Analysis : Symmetrical Components And Unbalanced Fault Analysis : Representation of Single Line to Ground, Line to Line and Double Line to Ground Fault Conditions |


Privacy Policy, Terms and Conditions, DMCA Policy and Compliant

Copyright © 2018-2024 BrainKart.com; All Rights Reserved. Developed by Therithal info, Chennai.