Home | | Software Testing | Defect classes, the defect repository and test design

Chapter: Software Testing : Testing Basics

Defect classes, the defect repository and test design

Defects can be classified in many ways. It is important for an organization to adapt a single classification scheme and apply it to all projects.

Defect classes, the defect repository and test design

Defects can be classified in many ways. It is important for an organization to adapt a single classification scheme and apply it to all projects. No matter which classification scheme is selected, some defects will fit into more than one class or category. Because of this problem, developers,testers, and SQA staff should try to be as consistent as possible when recording defect data. The defect types and frequency of occurrence should be used to guide test planning, and test design. Execution-based testing strategies should be selected that have the strongest possibility of detecting particular types of defects. It is important that tests for new and modified software be designed to detect the most frequently occurring defects. The reader should keep in mind that execution-based testing will detect a large number of the defects that will be described; however, software reviews as described in Chapter 10 are also an excellent testing tool for detection of many of the defect types that will be discussed in the following sections.

 

Defects, as described in this text, are assigned to four major classes reflecting their point of origin in the software life cycle—the development phase in which they were injected. These classes are: requirements/ specifications, design, code, and testing defects as summarized in Figure 3.2. It should be noted that these defect classes and associated subclasses focus on defects that are the major focus of attention to execution-based testers. The list does not include other defects types that are best found in software reviews, for example, those defects related to conformance to styles and standards. The review checklists in Chapter 10 focus on many of these types of defects.

 

1. Requirements and Specification Defects

The beginning of the software life cycle is critical for ensuring high quality in the software being developed. Defects injected in early phases can persist and be very difficult to remove in later phases. Since many requirements documents are written using a natural language representation, there are very often occurrences of ambiguous, contradictory, unclear, redundant, and imprecise requirements. Specifications in many organizations are also developed using natural language representations, and these too are subject to the same types of problems as mentioned

above.

However, over the past several years many organizations have introduced the use of formal specification languages that, when accompanied by tools, help to prevent incorrect descriptions of system behavior. Some specific requirements/specification defects are:

 

Functional Description Defects

 

The overall description of what the product does, and how it should behave (inputs/outputs), is incorrect, ambiguous, and/or incomplete.

Feature Defects

 

Features may be described as distinguishing characteristics of a software component or system.

 

Features refer to functional aspects of the software that map to functional requirements as described by the users and clients. Features also map to quality requirements such as performance and reliability. Feature defects are due to feature descriptions that are missing, incorrect, incomplete, or superfluous.

Feature Interaction Defects

These are due to an incorrect description of how the features should interact. For example, suppose one feature of a software system supports adding a new customer to a customer database. This feature interacts with another feature that categorizes the new customer. The classification feature impacts on where the storage algorithm places the new customer in the database, and also affects another feature that periodically supports sending advertising information to customers in a specific category. When testing we certainly want to focus on the interactions between these features.

Interface Description Defects

These are defects that occur in the description of how the target software is to interface with external software, hardware, and users. For detecting many functional description defects, black box testing techniques, which are based on functional specifications of the software, offer the best approach. In Chapter 4 the reader will be introduced to several black box testing techniques such as equivalence class partitioning, boundary value analysis, state transition testing, and cause-and-effect graphing, which are useful for detecting functional types of detects. Random testing and error guessing are also useful for detecting these types of defects. The reader should note that many of these types of defects can be detected early in the life cycle by software reviews. Black box-based tests can be planned at the unit, integration, system, and acceptance levels to detect requirements/specification defects. Many feature interaction and interfaces description defects are detected using black box-based test designs at the integration and system levels.

 

2. Design Defects

Design defects occur when system components, interactions between system components, interactions between the components and outside soft ware/hardware, or users are incorrectly designed. This covers defects in the design of algorithms, control, logic, data elements, module interface descriptions, and external software/hardware/user interface descriptions.

 

When describing these defects we assume that the detailed design description for the software modules is at the pseudo code level with processing steps, data structures, input/output parameters, and major control structures defined. If module design is not described in such detail then many of the defects types described here may be moved into the coding defects class.

Algorithmic and Processing Defects

 

These occur when the processing steps in the algorithm as described by the pseudo code are incorrect. For example, the pseudo code may contain a calculation that is incorrectly specified, or the processing steps in the algorithm written in the pseudo code language may not be in the correct order. In the latter case a step may be missing or a step may be duplicated.

 

Another example of a defect in this subclass is the omission of error condition checks such as division by zero. In the case of algorithm reuse, a designer may have selected an inappropriate algorithm for this problem (it may not work for all cases).

Control, Logic, and Sequence Defects

 

Control defects occur when logic flow in the pseudo code is not correct. For example, branching to soon, branching to late, or use of an incorrect branching condition. Other examples in this subclass are unreachable pseudo code elements, improper nesting, improper procedure or function calls. Logic defects usually relate to incorrect use of logic operators, such as less than (_), greater than (_), etc. These may be used incorrectly in a Boolean expression controlling a branching instruction.

 

 

 

 

Data Defects

 

These are associated with incorrect design of data structures. For example, a record may be lacking a field, an incorrect type is assigned to a variable or a field in a record, an array may not have the proper number of elements assigned, or storage space may be allocated incorrectly. Software reviews and use of a data dictionary work well to reveal these types of defects.

Module Interface Description Defects

 

These are defects derived from, for example, using incorrect, and/or inconsistent parameter types, an incorrect number of parameters, or an incorrect ordering of parameters.

Functional Description Defects

 

The defects in this category include incorrect, missing, and/or unclear design elements. For example, the design may not properly describe the correct functionality of a module. These defects are best detected during a design review.

External Interface Description Defects

These are derived from incorrect design descriptions for interfaces with COTS components, external software systems, databases, and hardware devices (e.g., I/O devices). Other examples are user interface description defects where there are missing or improper commands, improper sequences of commands, lack of proper messages, and/or lack of feedback messages for the user.

 

3. Coding Defects

Coding defects are derived from errors in implementing the code. Coding defects classes are closely related to design defect classes especially if pseudo code has been used for detailed design. Some coding defects come from a failure to understand programming language constructs, and miscommunication with the designers. Others may have transcription or omission origins. At times it may be difficult to classify a defect as a design or as a coding defect. It is best to make a choice and be consistent when the same defect arises again.

Algorithmic and Processing Defects

 

Adding levels of programming detail to design, code-related algorithmic and processing defects would now include unchecked overflow and underflow conditions, comparing inappropriate data types, converting one data type to another, incorrect ordering of arithmetic operators (perhaps due to misunderstanding of the precedence of operators), misuse or omission of parentheses, precision loss, and incorrect use of signs.

Control, Logic and Sequence Defects

 

On the coding level these would include incorrect expression of case statements, incorrect iteration of loops (loop boundary problems), and missing paths.

Typographical Defects

These are principally syntax errors, for example, incorrect spelling of a variable name, that are usually detected by a compiler, self-reviews, or peer reviews.

 

Initialization Defects

 

These occur when initialization statements are omitted or are incorrect. This may occur because of misunderstandings or lack of communication between programmers, and/or programmers and designers, carelessness, or misunderstanding of the programming environment.

 

Data-Flow Defects

 

There are certain reasonable operational sequences that data should flow through. For example, a variable should be initialized, before it is usedin a calculation or a condition. It should not be initialized twice before there is an intermediate use. A variable should not be disregarded before it is used. Occurrences of these suspicious variable uses in the code may, or may not, cause anomalous behavior. Therefore, in the strictest sense of the definition for the term ―defect,‖ they may not be considered as true instances of defects. However, their presence indicates an error has occurred and a problem exists that needs to be addressed.

 

Data Defects

 

These are indicated by incorrect implementation of data structures. For example, the programmer may omit a field in a record, an incorrect type or access is assigned to a file, an array may not be allocated the proper number of elements. Other data defects include flags, indices, and constants set incorrectly.

 

Module Interface Defects

 

As in the case of module design elements, interface defects in the code may be due to using incorrect or inconsistent parameter types, an incorrect number of parameters, or improper ordering of the parameters. In addition to defects due to improper design, and improper implementation of design, programmers may implement an incorrect sequence of calls or calls to nonexistent modules.

 

Code Documentation Defects

 

When the code documentation does not reflect what the program actually does, or is incomplete or ambiguous, this is called a code documentation defect. Incomplete, unclear, incorrect, and outof-date code documentation affects testing efforts. Testers may be misled by documentation defects and thus reuse improper tests or design new tests that are not appropriate for the code. Code reviews are the best tools to detect these types of defects.

 

External Hardware, Software Interfaces Defects

 

These defects arise from problems related to system calls, links to databases, input/output sequences, memory usage, resource usage, interrupts and exception handling, data exchanges with hardware, protocols, formats, interfaces with build files, and timing sequences (race conditions may result).

 

Many initialization, data flow, control, and logic defects that occur in design and code are best addressed by white box testing techniques applied at the unit (single-module) level. For example, data flow testing is useful for revealing data flow defects, branch testing is useful for detecting control defects, and loop testing helps to reveal loop-related defects. White box testing approaches are dependent on knowledge of the internal structure of the software, in contrast to black box approaches, which are only dependent on behavioral specifications. The reader will be introduced to several white box-based techniques in Chapter 5. Many design and coding defects are also detected by using black box testing techniques. For example, application of decision tables is very useful for detecting errors in Boolean expressions. Black box tests as described in Chapter 4 applied at the integration and system levels help to reveal external hardware and software interface defects. The author will stress repeatedly throughout the text that a combination of both of these approaches is needed to reveal the many types of defects that are likely to be found in software.

 

4. Testing Defects

 

Defects are not confined to code and its related artifacts. Test plans, test cases, test harnesses, and test procedures can also contain defects. Defects in test plans are best detected using review techniques.

Test Harness Defects

 

In order to test software, especially at the unit and integration levels, auxiliary code must be developed. This is called the test harness or scaffolding code. Chapter 6 has a more detailed discussion of the need for this code. The test harness code should be carefully designed, implemented, and tested since it a work product and much of this code can be reused when new releases of the software are developed. Test harnesses are subject to the same types of code and design defects that can be found in all other types of software.

Test Case Design and Test Procedure Defects

 

These would encompass incorrect, incomplete, missing, inappropriate test cases, and test procedures. These defects are again best detected in test plan reviews as described in Chapter 10. Sometimes the defects are revealed during the testing process itself by means of a careful analysis of test conditions and test results. Repairs will then have to be made.


Study Material, Lecturing Notes, Assignment, Reference, Wiki description explanation, brief detail
Software Testing : Testing Basics : Defect classes, the defect repository and test design |


Privacy Policy, Terms and Conditions, DMCA Policy and Compliant

Copyright © 2018-2024 BrainKart.com; All Rights Reserved. Developed by Therithal info, Chennai.